|
KEY TECHNOLOGY
HQSF. Mixing a special μSC additive in the dielectric fluid achieves superior finish machining performance. Compared withthe conventional EDM process, surface roughness is reduced by 50% over the same surface area, and the thermal recastlayer is also minimized to extend die & mold life. *Available with S series.
| Workpiece material: SKD-11
Electrode material: Copper
Electrode dimension reduction: 0.1mm (one side)
Surface finish: 1 μm Rmax
Machining time: 10 часа
| SUPER SURFACE
Super Surface provides a surface finish without any pinholesusually seen in EDM surfaces at depths greater than the surfaceroughness. This makes it possible to reduce the polishing time.(Surface imperfections due to free-machining components arenot improved). Electrode used: 40 mm dia. copper electrode,Workpiece material: NAK80
| 
Though not visible to the eye, the difference in surfacequality is clearly evident when magnified.
| 
| | Conventional EDM Process | Super Surface machiningThe best satin finish is even finerand more uniform. |
|
 | Z axis stabilizer
To ensure high-accuracy machining,even the slightest amount of heatgeneration cannot be overlooked.The Z-axis stabilizer reliably removesheat generated by repeated jumpmotions.
| <><>
|
MODEL PLAN IV
Makino's unique control functions and machining expertise areconcentrated in one screen. All the items needed for programmingcan be selected with a single button, making it simple to create andcheck machining programs. In addition, a Machining Scheduler enablesmultiple programs to be registered for consecutive execution.
|
 
EDNC30(S) EDNS40(S)  
EDNC65(S) EDNC43(S) Model | Travels
X , Y , Z axes (mm) | Table dimensions(mm) | Work Tank innerdimensions (mm) | EDNC30 (S) | 300 x 250 x 250 | 500 x 350 | 650 x 450 x 300 | EDNC40 (S) | 450 x 300 x 320 | 600 x 450 | 800 x 550 x 350 | EDNC43T (S) | 450 x 350 x 400 | 700 x 500 | 850 x 650 x 450 | EDNC65 (S) | 650 x 450 x 350 | 800 x 550 | 1100x 750 x 450 |
EDNC43T(S)with E/W Changer 320 Multilevel storage type of automaticElectrode and Workpiece ChangerCapable of storing 96 electrode holdersand 6 workpiece pallets |
Sinker EDM 
